Technical Support Notes
| Article ID: | T4111 |
| Date: | 11/23/09 |
| Product: | EPSON RC+ v6.0.0 |
| Subject: | Object reference not found errors occur if a new sequence is created and calibrations exist |
Symptoms
Object reference not found errors occur if a
new sequence is created and calibrations exist
1. Create a new sequence
2. Create a default calibration.
3. Create a new sequence - object reference not found errors occur
Causes
This
is caused by a bug in EPSON RC+ 6.0.
Remedy
After creating one or more
calibrations, save, then restart RC+.
Status
This problem was fixed in EPSON RC+ v6.1.0.
