Technical Support Notes
| Article ID: | T2942 |
| Date: | 6/20/07 |
| Product: | EPSON RC+ v5.0.0 - v5.2.0 SP3 |
| Subject: | GUI components are displayed incorrectly because of Windows DPI setting |
Symptoms
Buttons or other GUI components are displayed
incorrectly because the Windows DPI setting is not 96. When using
Vision Guide, Smart Camera communication timeout errors can occur.
Some wide
screen laptops ship with the DPI set to 120.
Causes
Windows DPI settings other than 96 (normal) are currently not supported.
Remedy
Set the Windows DPI setting to 96.
Open Display properties from the Control Panel,
then go to Settings | Advanced | General | DPI. Change to Normal (96).
Status
This problem will be fixed in a future release.
